ELSYNA

Official Elsyna Setup & Troubleshooting Guide

Select your product guide below to view tailored step-by-step setup instructions and troubleshooting tips.

Dead by Daylight (Vannia) Setup Guide v4.09 Payload

Dead by Daylight (Vannia) Startup Guide

Download the loader here latest (10/14/2026). Follow these steps carefully for the first product launch.

Download Loader
1

Windows Security & Core Isolation Settings

Go to Virus & threat protection settings. Turn off "Real-time protection" and "Tamper Protection".
Then go to Core isolation settings and disable all checkboxes.

Disable Vulnerable Driver Blocklist (Run CMD as Admin):
Restart your computer after completing this step.
2

Disable Defender & Remove Conflicting Anti-Cheats

Disable Windows Defender using DControl (Password: sordum).
Uninstall conflicting anti-cheats (Vanguard, FACEIT, ESEA) and third-party antiviruses (Malwarebytes, Kaspersky) as they run in the background even when closed.

Download DControl (Defender Control)
3

Install C++ & DirectX Runtimes

Download C++ Redists and DirectX Redists. Extract archives, run install_all.bat in C++ Redists folder, and run the DirectX Setup.
Restart your system after both finish installing.

Download Visual C++ All-In-One Pack (TechPowerUp)
4

Extract Loader & Apply Initial System Patch

Extract the loader from BOTH archives. Right-click Launcher.exe → click "Run as Administrator".
It will apply patches to your system. When completed, restart your computer once again.

5

Launching Steps & In-Game Controls

1. Extract and run the loader as administrator. Select Dead by Daylight and press "Load".
2. Loading progress may stay at 25% for 1-2 minutes. Once injection is successful, press "OK".
3. The loader will auto-delete itself and you can open Dead by Daylight.
4. The game will freeze for a few seconds, then the menu will appear.
5. Press DELETE key to open and close the menu.
Note: Re-extract the loader each time you want to inject.

DBD Pak-Bypass V2 Startup Guide

Date updated 10/23/2026

Download Launcher
(DO NOT SKIP) Read Pak-Bypass Guide for setup on: Pak-Bypass Google Docs Guide
1

Disable Windows Defender

Disable Windows Defender (DControl Recommended).

2

Disable Virtualization in BIOS

Disable Virtualization in BIOS.

3

Close Unused Tray Programs

Close any programs you don't need / use from your Tray (the up arrow at bottom right of your Desktop).

4

Delete Conflicting Anti-Cheats

Delete Vanguard, FACEIT and ESEA anti-cheats completely.

5

Disable Vulnerable Driver Blocklist

Disable Vulnerable Driver Blocklist.

Quick Registry Command (Run CMD as Admin):
6

Keep Everything in a New Folder

Keep everything in a new folder anywhere on your computer.

Vannia Elite Setup Guide

Follow these steps carefully for the first product launch.

Go to Sign-Up Panel
Do NOT skip setup video for Elite: Watch Elite Setup Video
1

Turn Off Windows Security

Make sure Windows Security is off. (DControl recommended) If you are in Windows 11, 25H2+ it won't work for Steam properly. You need to downgrade.

2

Create the Vannia Elite Folder

Create a folder named Vannia Elite on your Desktop.

3

Add Windows Security Exception

On your Windows Security settings create an exception for the Vannia Elite folder in your Desktop.

4

Sign Up on the Panel

Go to https://vannia.rip/panels/sign-up/

5

Watch the Setup Video

Watch setup video if you get stuck.

Open Video Guide

Marvel Rivals Startup Guide

Download the loader here latest (10/14/2026). Follow these steps carefully for the first product launch.

Download Loader
1

Windows Security & Core Isolation Settings

Go to Virus & threat protection settings. Turn off "Real-time protection" and "Tamper Protection".
Then go to Core isolation settings and disable all checkboxes.

Disable Vulnerable Driver Blocklist (Run CMD as Admin):
Restart your computer after completing this step.
2

Disable Defender & Remove Conflicting Anti-Cheats

Disable Windows Defender using DControl (Password: sordum).
Uninstall conflicting anti-cheats (Vanguard, FACEIT, ESEA) and third-party antiviruses (Malwarebytes, Kaspersky) as they run in the background even when closed.

Download DControl (Defender Control)
3

Install C++ & DirectX Runtimes

Download C++ Redists and DirectX Redists. Extract archives, run install_all.bat in C++ Redists folder, and run the DirectX Setup.
Restart your system after both finish installing.

Download Visual C++ All-In-One Pack (TechPowerUp)
4

Extract Loader & Apply Initial System Patch

Extract the loader from BOTH archives. Right-click Launcher.exe → click "Run as Administrator".
It will apply patches to your system. When completed, restart your computer once again.

5

Launching Steps & In-Game Controls

1. Extract and run the loader as administrator. Select Marvel Rivals and press "Load".
2. Loading progress may stay at 25% for 1-2 minutes. Once injection is successful, press "OK".
3. The loader will auto-delete itself and you can open Marvel Rivals.
4. The game will freeze for a few seconds, then the menu will appear.
5. Press DELETE key to open and close the menu.
Note: Re-extract the loader each time you want to inject.

Halloween The Game Startup Guide

Download the loader here latest (10/14/2026). Follow these steps carefully for the first product launch.

Download Loader
1

Windows Security & Core Isolation Settings

Go to Virus & threat protection settings. Turn off "Real-time protection" and "Tamper Protection".
Then go to Core isolation settings and disable all checkboxes.

Disable Vulnerable Driver Blocklist (Run CMD as Admin):
Restart your computer after completing this step.
2

Disable Defender & Remove Conflicting Anti-Cheats

Disable Windows Defender using DControl (Password: sordum).
Uninstall conflicting anti-cheats (Vanguard, FACEIT, ESEA) and third-party antiviruses (Malwarebytes, Kaspersky) as they run in the background even when closed.

Download DControl (Defender Control)
3

Install C++ & DirectX Runtimes

Download C++ Redists and DirectX Redists. Extract archives, run install_all.bat in C++ Redists folder, and run the DirectX Setup.
Restart your system after both finish installing.

Download Visual C++ All-In-One Pack (TechPowerUp)
4

Extract Loader & Apply Initial System Patch

Extract the loader from BOTH archives. Right-click Launcher.exe → click "Run as Administrator".
It will apply patches to your system. When completed, restart your computer once again.

5

Launching Steps & In-Game Controls

1. Extract and run the loader as administrator. Select Halloween The Game and press "Load".
2. Loading progress may stay at 25% for 1-2 minutes. Once injection is successful, press "OK".
3. The loader will auto-delete itself and you can open Halloween The Game.
4. The game will freeze for a few seconds, then the menu will appear.
5. Press DELETE key to open and close the menu.
Note: Re-extract the loader each time you want to inject.

(DO NOT SKIP) Make sure to Read this STEP-BY-STEP SETUP GUIDE GOOGLE DOCUMENT on: Woofer V3 Setup Guide (Google Docs)

Woofer V3 Build Downloads

(10/21/2026) Latest build (test Win 11, 24H2/25H2)

Download Build
Note: The spoofer is temporary. Upon restarting your PC, your hardware returns to original status and you must spoof again.

System Requirements & BIOS Settings

  • TPM: Disabled in BIOS (if giving issues)
  • Secure Boot: Disabled in BIOS (if giving issues)
  • CSM / Legacy: Disabled in BIOS
  • Disk Mode: Must be in AHCI Mode (RAID will not work!)
  • Boot Mode: Must use UEFI (Legacy Boot will not work!)
  • Intel Rapid Storage Technology: Turn Off
  • Virtualization: Disabled in BIOS (Required)
  • Windows OS: Windows 10 or 11 (Build 22H2 - 25H2)
  • USB Storage: Unplug all external HDDs & USB drives during and after spoofing
1

Registry Editor Fix

Open Registry Editor and navigate to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CI\Config
Modify VulnerableDriverBlocklistEnable value from 1 to 0.

Quick Registry Command (Run CMD as Admin):
2

Disable Antivirus, Vanguard, FACEIT & Security

• Disable or uninstall 3rd-party Antiviruses, Vanguard, FACEIT, ESEA, MSI Afterburner.
• In Windows Security → Virus & Threat Protection → Turn OFF Real-Time & Tamper Protection.
• In App & Browser Control → Turn off all active protection.
• In Device Security → Disable Core Isolation & Memory Integrity.
• In Firewall & Network Protection → Turn off active firewalls.

3

Exploit Protection & Defender Control

• Open Exploit Protection in Windows Search and disable all settings (requires PC restart).
• Run Defender Control (DControl) as Admin and click Disable Windows Defender.

Download Defender Control (DControl)
4

Install Required Runtimes & Visual Studio Components

1. Run Visual Studio Installer and check:
  - Desktop Development with C++
  - .NET Desktop Development
  - WinUI C++ Development
2. Extract and run Visual-C-Runtimes (install_all.bat as Admin).
3. Run DirectX Redist (DXSETUP.exe as Admin).
4. Run aio-runtimes_v2.5.0 (select all except Adobe Shockwave).

5

UAC & DLL Configurations

• Press Windows key, search Change User Account Control Settings, slide to bottom (Never Notify) & Click OK.
• Check the DLLs folder in setup and follow the instructions in How to use DLLs.txt.
• Reboot your PC once these steps are completed.

6

Launch & Run Spoofer

1. Create a Windows Restore Point before proceeding.
2. Run Spoofer as Admin & redeem your license key.
3. Go to Settings (Gear Icon) and verify dependencies & compatibility are green.
4. Click Game Controller icon → Under SPOOFER, click Clean (if needed for Rust, Fortnite, CoD), then click Change Seed and hit Launch.
5. Wait for green success popup on the top right, close loader and launch your game!

Still Need Assistance?

Our technical support staff is available 24/7 on Discord to help with custom configuration issues.

Join Support Discord